Excel Series Light Duty Cone Pulley Lathe Machine
Quick Contact
Excel Series Light Duty Lathe Machine will have 190 mm (7.5" Inch) height of center which is 25 mm more height of center than regular light duty lathe machines available in market.
Bed:-The bed is made of high graded casting and its heat treated with high quality induction hardened and grounded to opt long lasting life, after it well machined.the design of bed very sturdy to resist any kind of vibration.
Head Stock:-The head stock is made of good quality graded cast iron material and it is well machined,The spindle is made good alloy steel and its fully heat treated and grounded,it runs on best quality bearings, and bushes where and when it requires.
Carriage: The carriage is located between the headstock and tailstock and serves the purpose of supporting, guiding and feeding the tool against the job during operation.
Tail Stock:- the tailstock is made of good quality graded cast iron material and it is well machined,maintained its alignment with head stock to getting best accuracy.tailstock spindle is made good alloy steel ,fully heat treated and grounded,
Legs: The legs carry the entire load of machine and are firmly secured to floor by foundation bolts.
Special Features
- Good quality casting with high quality flame hardened bed to resist wear and tear.
Main spindle and Tail stoke spindle will be hardened and grounded.
Pulleys and gears will be Dynamically balanced.
Fully oil bath Appron gear box.
Steel parts are made of Alloy Steel.
Bushes are made of Gun Metal.
Standard Accessories
- Flame hardened bed ways
Chuck back plate
Center adapter
Live And Dead center
Tool post Spanner
Motor Pulley
Gear set for British and Metric Threading
Safety Guards
Extra Accessories
- Face plate
Carrier plate
Steady rest,Follow rest
Taper turning attachment
Motorised Coolant Pump and its tank
Rear Tool Post
Norton gear box (Quick change gear box)
Electrification
Specification
| Model | BL-0/XLD | BL-1/XLD | BL-2/XLD | BL-3/XLD |
|---|---|---|---|---|
| Admit bet. Center in mm | 305 (12 inch) | 650 (25½ inch) | 880 (34½ inch) | 1105 (204½ inch) |
| Length of Bed in mm | 1065 (3½ Ft) | 1370 (4½ Ft) | 1600 (5¼ Ft) | 1825 (6 Ft) |
| Width of bed in mm | 240 (9½ inch) | 240 (9½ inch) | 240 (9½ inch) | 240 (9½ inch) |
| Height of Centre in mm | 165 (6½ inch) | 190 (7½ inch) | 190 (7½ inch) | 190 (7½ inch) |
| Swing over bed in mm | 300 (11¾ inch) | 375 (14¾ inch) | 375 (14¾ inch) | 375 (14¾ inch) |
| Swing over cross slide in mm | 200 (7¾ inch) | 230 (9 inch) | 230 (9 inch) | 230 (9 inch) |
| Swing in gap in mm | 550 (21½ inch) | 580 (22¾ inch) | 580 (22¾ inch) | 580 (22¾ inch) |
| Length of gap IFO face plate in mm | 115 (4½ inch) | 115 (4½ inch) | 115 (4½ inch) | 115 (4½ inch) |
| MAIN SPINDLE | ||||
| Type & Size of Spindle Nose | Threaded | Threaded | Threaded | Threaded |
| Spindle Bore in mm | 38 (1½ inch) | 38 (1½ inch) | 38 (1½ inch) | 38 (1½ inch) |
| No of Speed/Range in RPM | 8/36 to 857 | 8/36 to 857 | 8/36 to 857 | 8/36 to 857 |
| Morse Taper | MT-5 | MT-5 | MT-5 | MT-5 |
| TAIL STOCK | ||||
| Diameter of Spindle (RAM) | 38 (1½ inch) | 38 (1½ inch) | 38 (1½ inch) | 38 (1½ inch) |
| Travelling of Spindle (RAM) | 170 (6½ inch) | 170 (6½ inch) | 170 (6½ inch) | 170 (6½ inch) |
| Morse Taper of Spindle (RAM) | MT-3 | MT-3 | MT-3 | MT-3 |
| LEAD SCREW | ||||
| Diameter of Lead Screw / TPI | 25.4 (1 inch) / 4 | 25.4 (1 inch) / 4 | 25.4 (1 inch) / 4 | 25.4 (1 inch) / 4 |
| THREADS | ||||
| No of Threads / Range in mm without Norton Gear Box | 21/1 mm to 7 mm pitch | 21/1 mm to 7 mm pitch | 21/1 mm to 7 mm pitch | 21/1 mm to 7 mm pitch |
| No of Threads / Range in inch without Norton Gear Box | 29/4 to 48 TPI | 29/4 to 48 TPI | 29/4 to 48 TPI | 29/4 to 48 TPI |
| No of Threads / Range in mm | 17/0.5 mm to 15 pitch | 17/0.5 mm to 15 pitch | 17/0.5 mm to 15 pitch | 17/0.5 mm to 15 pitch |
| No of Threads / Range in inch | 40/2 to 60 TPI | 40/2 to 60 TPI | 40/2 to 60 TPI | 40/2 to 60 TPI |
| Floor Space Occupied in mm | 1200 x 850 | 1500 x 850 | 1750 x 850 | 2200 x 850 |
| Approx. Weight in Kgs | 400 | 500 | 550 | 600 |
| Approx. Case Dimensions in mm | 1500 x 900 x 1350 | 1700 x 900 x 1350 | 1950 x 900 x 1350 | 2400 x 900 x 1350 |
