Medium Duty ALL Geared Head Lathe Machine
Quick Contact
We are offering precision lathe machine with heavy and robust design,Our Lathe Machine is specially designed hence it is as useful for Tool Room as workshop to opt high productivity.All components as well as the whole machine is inspected by our qualified staff to ensure best results.
Bed:-The bed is made of high graded casting and its heat treated with high quality induction hardened and grounded to opt long lasting life, after it well machined.the design of bed very sturdy to resist any kind of vibration.
Geared Head Stock:-The geared head stock remains fully oil bath and made of good quality graded cast iron material and it is well machined,The spindle is made good alloy steel ,fully heat treated and grounded and mounted on best quality bearing , the gears of headstock is made of good alloy steel and its heattreated and grounded to get long lasting life and avoid unnecessosary voice.
Carriage: The carriage is located between the headstock and tailstock and serves the purpose of supporting, guiding and feeding the tool against the job during operation.
Tail Stock:- the tailstock is made of good quality graded cast iron material and it is well machined,maintained its alignment with head stock to getting best accuracy.tailstock spindle is made good alloy steel ,fully heat treated and grounded,
Legs: The legs carry the entire load of machine and are firmly secured to floor by foundation bolts.
Special Features
- Good Quality graded casting with high quality hardened and grounded bed ways to resist wear and tear and get extra long life.
Main spindle and Tail stoke spindle will be hardened and grounded.
Pulleys and gears are to be Dynamically balanced.
Fully oil bath Appron gear box.
Steel parts are made of Alloy Steel.
Bushes are made of Gun Metal Material.
Standard Accessories
- Flame hardened and grounded bed ways.
Chuck back plate
Center adapter
Live and Dead center
Tool Post Spanner
Motor Pulley
Set of gears for British and Metric thread
Safety Guards
Extra Accessories
- Face plate
Carrier plate
Steady rest , Follow rest
Taper Turning Attachment
Motorised Coolant pump and its tank
Rear Tool Post
Norton gear box (Quick change gear box)
Electrification
Specification
| Model | BL-1MDGH | BL-2/MDGH | BL-3/MDGH |
|---|---|---|---|
| Admit bet. Center in mm | 540(21¼" Inch) | 770(30¼" Inch) | 1000(39¼" Inch) |
| Length of Bed in mm | 1370 (4½ Ft) | 1600 (5¼ Ft) | 1825 (6 Ft) |
| Width of bed in mm | 275 (10¾" inch) | 275(10¾" inch) | 275(10¾" inch) |
| Height of Centre in mm | 215 (8½ inch) | 215 (8½ inch) | 215 (8½ inch) |
| Swing over bed in mm | 425 | 425 | 425 |
| Swing over cross slide in mm | 250 (10 inch) | 250 (10 inch) | 250 (10 inch) |
| MAIN SPINDLE | |||
| Type & Size of Spindle Nose | THREADED | THREADED | THREADED |
| Spindle Bore in mm | 40 (1½ inch) | 40 (1½ inch) | 40 (1½ inch) |
| No of Speed/Range in RPM | 8/50 to 1000 | 8/50 to 1000 | 8/50 to 1000 |
| Morse Taper | MT-5 | MT-5 | MT-5 |
| TAIL STOCK | |||
| Diameter of Spindle (RAM) | 51.8 (2 inch) | 51.8 (2 inch) | 51.8 (2 inch) |
| Travelling of Spindle (RAM) | 135 (5¼ inch) | 135 (5¼ inch)) | 135 (5¼ inch)) |
| Morse Taper of Spindle (RAM) | MT-4 | MT-4 | MT-4 |
| LEAD SCREW | |||
| Diameter of Lead Screw / TPI | 31.75 (1¼ inch) / 4 | 31.75 (1¼ inch) / 4 | 31.75 (1¼ inch) / 4 |
| THREADS | |||
| No of Threads / Range in mm | 17/0.5 mm to 15 pitch | 17/0.5 mm to 15 pitch | 17/0.5 mm to 15 pitch |
| No of Threads / Range in inch | 40/2 to 60 TPI | 40/2 to 60 TPI | 40/2 to 60 TPI |
| Floor Space Occupied in mm | 1500 x 970 | 1750 x 970 | 2200 x 970 |
| Approx. Weight in Kgs | 575 | 625 | 700 |
| Approx. Case Dimensions in mm | 2050 x 900 x 1500 | 2275 x 900 x 1500 | 2500 x 1000 x 1500 |
