Heavy Duty Cone Pulley Lathe Machine
Quick Contact
We are offering precision lathe machine with heavy and robust design,Our Lathe Machine is specially designed hence it is as useful for Tool Room as workshop to opt high productivity.All components as well as the whole machine is inspected by our qualified staff to ensure best results.
Bed:-The bed is made of high graded casting and its heat treated with high quality induction hardened and grounded to opt long lasting life, after it well machined.the design of bed very sturdy to resist any kind of vibration.
Head Stock:-The head stock is made of good quality graded cast iron material and it is well machined,The spindle is made good alloy steel and its fully heat treated and grounded,it runs on best quality bearings, and bushes where and when it requires.
Carriage: The carriage is located between the headstock and tailstock and serves the purpose of supporting, guiding and feeding the tool against the job during operation.
Tail Stock:- the tailstock is made of good quality graded cast iron material and it is well machined,maintained its alignment with head stock to getting best accuracy.tailstock spindle is made good alloy steel ,fully heat treated and grounded,
Legs: The legs carry the entire load of machine and are firmly secured to floor by foundation bolts.
Special Features
- Good Quality graded casting with high quality hardened and grounded bed ways to resist wear and tear and get extra long life.
Main spindle and Tail stoke spindle will be hardened and grounded.
Pulleys and gears are to be Dynamically balanced.
Fully oil bath Appron gear box.
Steel parts are made of Alloy Steel.
Bushes are made of Gun Metal Material.
Standard Accessories
- Flame hardened and grounded bed ways.
Chuck back plate
Center adapter
Live and Dead center
Tool Post Spanner
Motor Pulley
Set of gears for British and Metric thread
Safety Guards
Extra Accessories
- Face plate
Carrier plate
Steady rest , Follow rest
Taper Turning Attachment
Motorised Coolant pump and its tank
Rear Tool Post
Norton gear box (Quick change gear box)
Electrification
Specification
| Model | BL-0/HD-330 | BL-1/HD-330 | BL-2/HD-330 | BL-3/HD-330 | BL-4/HD-330 | BL-5/HD-330 | BL-6/HD-330 |
|---|---|---|---|---|---|---|---|
| Admit bet. Center in mm | 525 (20½" inch) | 1000 (39¼ inch) | 1600(63 " INCH) | 1900(74¾ inch) | 2500 (98¼ inch) | 3100(122 INCH) | 3710(146 " INCH) |
| Length of Bed in mm | 1675 (5½ ft) | 2135 (7 ft) | 2745(9 ft) | 3050(10 ft) | 3880912 bft) | 4270(14 ft) | 4875(16 ft) |
| Width of bed in mm | 330 (13" inch) | 330 (13" inch) | 330 (13" inch) | 330 (13" inch) | 330 (13" inch) | 330 (13" inch) | 330 (13" inch) |
| Height of Centre in mm | 254 (10"inch) | 254 (10"inch) | 254 (10"inch) | 254 (10"inch) | 254 (10"inch) | 254 (10"inch) | 254 (10"inch) |
| Swing over bed in mm | 505(19¾ inch) | 505(19¾ inch) | 505(19¾ inch) | 505(19¾ inch) | 505(19¾ inch) | 505(19¾ inch) | 505(19¾ inch) |
| Swing over cross slide in mm | 300(11¾ inch) | 300(11¾ inch) | 300(11¾ inch) | 300(11¾ inch) | 300(11¾ inch) | 300(11¾ inch) | 300(11¾ inch) |
| Swing in gap in mm | 805(31½" inch) | 805(31½" inch) | 805(31½" inch) | 805(31½" inch) | 805(31½" inch) | 805(31½" inch) | 805(31½" inch) |
| Length of gap IFO face plate in mm | 190(7½" inch) | 190(7½" inch) | 190(7½" inch) | 190(7½" inch) | 190(7½" inch) | 190(7½" inch) | 190(7½" inch) |
| MAIN SPINDLE | |||||||
| Type & Size of Spindle Nose | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded | Threaded |
| Spindle Bore in mm | 51.8 | 51.8 | 51.8 | 51.8 | 51.8 | 51.8 | 51.8 |
| No of Speed/Range in RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM | 8/26 TO 465 RPM |
| Morse Taper | MT/6 | MT/6 | MT/6 | MT/6 | MT/6 | MT/6 | MT/6 |
| TAIL STOCK | |||||||
| Diameter of Spindle (RAM | 51.8(2 " INCH) | 51.8(2 " INCH) | 51.8(2 " INCH) | 51.8(2 " INCH) | 51.8(2 " INCH) | 51.8(2 " INCH) | 51.8(2 " INCH) |
| Travelling of Spindle (RAM | 180 (7" INCH) | 80 (7" INCH) | 80 (7" INCH) | 80 (7" INCH) | 80 (7" INCH) | 80 (7" INCH) | 80 (7" INCH) |
| Morse Taper of Spindle (RAM) | MT/4 | MT/4 | MT/4 | MT/4 | MT/4 | MT/4 | MT/4 |
| LEAD SCREW | |||||||
| Diameter of Lead Screw/TPI | 38.1(1½" inch) | 38.1(1½" inch) | 38.1(1½" inch) | 38.1(1½" inch) | 38.1(1½" inch) | 38.1(1½" inch) | 38.1(1½" inch) |
| THREADS | |||||||
| No of Threads/Range in Metric without Norton Gear Box | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH | 15/1 TO 6 PITCH |
| No of Threads/Range in Inch without Norton Gear Box | 20/2 TO 24 TPI | 20/2 TO 24 TPI | 20/2 TO 24 TPI | 20/2 TO 24 TPI | 20/2 TO 24 TPI | 20/2 TO 24 TPI | 20/2 TO 24 TPI |
| No of Threads/Range with Norton Gear Box in Metric | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH | 24/0.5 TO 15 PITCH |
| No of Threads/Range with Norton Gear Box in Inch | 44/2 TO 60 TPI | 44/2 TO 60 TPI | 44/2 TO 60 TPI | 44/2 TO 60 TPI | 44/2 TO 60 TPI | 44/2 TO 60 TPI | 44/2 TO 60 TPI |
| Floor Space Occupied in mm | 2200 X 1450 | 2660 X 1450 | 3260 X 1450 | 3500 X 1450 | 4110 X 1450 | 4720 X 1450 | 5330 X 1450 |
| Approx Weight in Kgs | 1200 KG | 1300 KG | 1400 KG | 1650 KG | 1800 KG | 2100 KG | 2500 KG |
| Approx Case Dimensions in mm | 2400X1300X1600 | 2850X1300X1600 | 3350X1300X1600 | 3700X1300X1600 | 4300X1300X1600 | 5000X1300X1600 | 5550X1300X1600 |
Related Products
Bright Engineering Works - A Lathe Machine Manufacturing Company
B/H S.T. Workshop,Gondal Road,
Rajkot - 360 004. Gujarat, India.